The Nexans LANmark-7 GG45 snap-in connectors now include an improved design of the metal cross.The longer cross increases the chamber-separation and ensures a closer contact to the foils of the cable pairs. This makes the termination easier and quicker and improves the performance of the link. A new GG45-Flex snap-in connector is introduced, designed specifically to accommodate smaller stranded conductors. This enables the use of flexible data cables and the support of cabling schemes with consolidation points in line with the 3 and 4 connector model.

Nexans Cat.7 patchcords with GG45 non switched plugs enable a GG45 permanent link to be used in 600 MHz mode. The protruding part on the plug activates the switch within the GG45 jack and terminates the not used contacts of RJ45 to ground. Using the 8 contacts in the extreme outer corners of the RJ45 interface for transmission, excellent NEXT and Return Loss performance are achieved. Nexans Cat.7 patchcords maximise the full performance of the channel and will exceed the requirements of the ISO 4 connector model. This provides improved data throughput up to 600 MHz and allows for the inclusion of additional patching or Consolidation Points for maximum system flexibility and all future data applications.

The Frame is a READY TO INSTALL Frame of up to 800 pairs and can be used as:
* High-density free standing single or double sided version.
* High-density Wall mounted single sided.
* High-density is extendable on a column by column base.

The modules are for installation in Category 5 components and systems. Printable with colour code and/or lettering. Simple installation of all components using KRONE PCB Module technology. The KRONE LSA-PLUS Contact system ensures constantly rel iableconnectivity. Optimum solder preparation via closed Module base.

Designed for the installation of a consolidation point, the zone distribution box significantlyimproves the flexibility of desk location in the offices. It is particularly useful in an open officewhere the flexibility of relocating outlet in the work area is required.The new Nexans branded product is easy to install in the ceiling, in the false floor or on thewall.As such it allows the full implementation of a 3 or 4 connectors model Nexans channel.The new product is compatible with all snap-in connectors in Nexans product portfolio. It usesan exclusive Nexans technology to install the connectors.

Accepting the range of ST & SC couplers, this patch panel with sliding mechanism facilitatesfront side installation.Suitable for tight buffer cables (direct termination) or Loose tube cables using SpliceCassette (890.001).

* 19” width.
* Delivered with ST and SC faceplates.
* Accommodates 24 ST, 12 duplex ST or 12 duplex SC couplers.
* 2 positions : flush or recessed with respect of cable bend radius.
* Comes with marking strips to number and categorise ports.

Nexans GIGAliteTM II MD-0625 fibre cable has been designed for applications where a highlevel of installation, environmental and optical features are required.

* Suitable for use in ducts or directly buried.
* Full Dielectric Armour.
* For areas where rodent protection is required.Up to 72 fibres capacity.

This full Category 6 patchcord maximises the full performance of the channel and willexceed the requirements of the ISO/IEC 4 connector model when used as part of a LANmark-6cabling Class E solution. This provides improved data throughput and allows for the inclusionof a cross-connect or Consolidation Points for maximum system flexibility.

* High Speed Multimedia patchcords.
* Screened and unscreened versions.
* This Cat6 patchcord utilises the C3 Category 6 cable technology.

The LANmark-6 Toolless Snap-in connector is part of the Nexans modular system andfits in all structural hardware designed for this range. When combined with a LANmarkCat6 Patchcord the LANmark-6 Snap-in connector exceeds the requirements of the Cat6/ClassE draft (ISO/IEC/WG3 N568) with considerable headroom. As such it supports alldata applications defined for Cat5, Cat5E and Cat6, such as 10baseT, Fast Ethernet, GigabitEthernet, 155 ATM, 622 ATM, 1.2 ATM.

Nexans GIGAliteTM II MD-0625 fibre cable has been designed for applications where a high level of installation, environmental and optical features is required.

- Suitable for use in ducts or directly buried.
- Full Dielectric Armour.
- For areas where rodent protection is required.
- Up to 72 fibres capacity.